I had to replace my abit board and 1.4 t-bird. so i got this setup
Tyan S2266
*Includes an Intel® Pentium® 4 1.60 GHz Processor!*
Features
- Supports one Intel Pentium 4 processor
- Supports a 400MHz Front-Side Bus
- Four 184-pin DDR DIMM sockets support up to 2GB DDR RAM
- Five 32-bit 33MHz PCI expansion slots and support 2/4x AGP cards
Specifications:
Processor
- Single PGA478 ZIF socket
- Supports one Intel Pentium 4 processor
- Onboard VRM (VRM 9.0 spec)
- Front-Side Bus support for 400MHz
Chipset
- VIA P4X266 chipset
- VT8753 north bridge and
- VT8233(C) south bridge
- Winbond LPC Super I/O ASIC
Memory
- Four 2.5v 184-pin DDR DIMM sockets
- Supports up to 2GB of Unbuffered DDR RAM
Expansion Slots
- One AGP slot supports 2x and 4x graphics mode
- Five 32-bit 33MHz (5-volt) PCI slots
- (v2.2 compliant)
- Total of six usable slots
I/O
- One floppy connector supports up to two drives
- Two 9-pin 16550-based serial ports
- One 25-pin SPP/ECP/EPP parallel port
- Two USB ports
- PS/2 keyboard and mouse ports
Integrated PCI IDE
- Dual-channel master mode
- Up to four Enhanced IDE devices
- Support for ATA-100/66/33 IDE and ATAPI compliant devices
Integrated LAN (optional)
- On-board network controller
- 10/100Mbps data transfer rate
Hardware Monitoring
- Winbond hardware monitoring ASIC
- CPU temperature, voltage, and fan speed monitoring
BIOS
- Award BIOS on 2Mb Flash ROM
- Supports APM v1.2 & ACPI v1.0
- User settings for hardware monitoring
- Auto-configuration of IDE hard drive types
- Muliple boot options
- DMI 2.0 compliant
Form Factor
- ATX footprint (12" x 9.6", 304.80 x 243.84mm)
- One 20-pin ATX power connector
- Stacked parallel (one) and serial (two) ports
- Stacked USB (two) ports and LAN (one-optional) ports
- Stacked keyboard and mouse ports
Tyan S2266
*Includes an Intel® Pentium® 4 1.60 GHz Processor!*
Features
- Supports one Intel Pentium 4 processor
- Supports a 400MHz Front-Side Bus
- Four 184-pin DDR DIMM sockets support up to 2GB DDR RAM
- Five 32-bit 33MHz PCI expansion slots and support 2/4x AGP cards
Specifications:
Processor
- Single PGA478 ZIF socket
- Supports one Intel Pentium 4 processor
- Onboard VRM (VRM 9.0 spec)
- Front-Side Bus support for 400MHz
Chipset
- VIA P4X266 chipset
- VT8753 north bridge and
- VT8233(C) south bridge
- Winbond LPC Super I/O ASIC
Memory
- Four 2.5v 184-pin DDR DIMM sockets
- Supports up to 2GB of Unbuffered DDR RAM
Expansion Slots
- One AGP slot supports 2x and 4x graphics mode
- Five 32-bit 33MHz (5-volt) PCI slots
- (v2.2 compliant)
- Total of six usable slots
I/O
- One floppy connector supports up to two drives
- Two 9-pin 16550-based serial ports
- One 25-pin SPP/ECP/EPP parallel port
- Two USB ports
- PS/2 keyboard and mouse ports
Integrated PCI IDE
- Dual-channel master mode
- Up to four Enhanced IDE devices
- Support for ATA-100/66/33 IDE and ATAPI compliant devices
Integrated LAN (optional)
- On-board network controller
- 10/100Mbps data transfer rate
Hardware Monitoring
- Winbond hardware monitoring ASIC
- CPU temperature, voltage, and fan speed monitoring
BIOS
- Award BIOS on 2Mb Flash ROM
- Supports APM v1.2 & ACPI v1.0
- User settings for hardware monitoring
- Auto-configuration of IDE hard drive types
- Muliple boot options
- DMI 2.0 compliant
Form Factor
- ATX footprint (12" x 9.6", 304.80 x 243.84mm)
- One 20-pin ATX power connector
- Stacked parallel (one) and serial (two) ports
- Stacked USB (two) ports and LAN (one-optional) ports
- Stacked keyboard and mouse ports